Industrial PaxScan® 2530HE
Flat Panel Detector
Product Description
PaxScan 2530HE imagers provide industry leading image quality for industrial and security applications. Varex Imaging’s amorphous silicon-based detectors are the benchmark for radiography in industrial, medical and dental applications.
Key advantages include:
• Design for high dose applications > 1 MRad
• Wide energy range: 20 kV - 16 MV
• Internal shielding up to 225 kV Electronics are outside of the detector active area allowing the integrator to provide additional external shielding of the electronics for use above 225 kV.
• Gigabit Ethernet link to workstation
Technical Specififications
Receptor Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Amorphous Silicon
Conversion Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DRZ Plus, CsI
Pixel Area Total . . . . . . . . . . . . . . . . . . 24.9 x 30.2 cm (9.8 x 11.9 in.)
Pixel Matrix Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1792 x 2176
Pixel Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 mm2
Energy Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 kV - 16 MV
Fill Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64.3%
Data Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gigabit Ethernet
Scan Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Progressive
A/D Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-bit
Frame Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 9 fps (1x1), 30 fps (2 x 2)
Exposure Control . . . . . . . . . . . User Sync input, Expose OK output
ViVA™
The software release includes ViVA™, a basic application for panel testing and calibration acquisition and viewing on an end
user workstation running Microsoft® Windows™. The developer’s software package includes a “Virtual Command Processor”
software interface that performs detector calibration, detector setup, image acquisition, and image corrections. ViVA™ includes file type translators for .viv, .raw, .jpg, and .bmp file formats.
Power
Power Dissipation . . . . . . . 16.5 Watts nominal power consumption 12 to 32 V DC input range, 15 V typical 3A inrush current at power up with 15 V supply
Power Supply/Mains . . . . . . . . . . . . . . . . . 100 - 240 VAC, 47 - 63 Hz
Mechanical
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 lbs ±0.25 lbs
Housing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum
Input Filtration . . . . . . . . . . . . . . . Carbon fiber plate (2.0 mm thick) and aluminum (0.05mm thick)
Environmental
Temperature Range - Operating . . . . . . . . . . -10°C to +40°C (max.)
(Ambient) - Storage . . . . . . . . . . . . . . . . . . . -15°C to +50°C
Humidity - Operating & Storage (non-condensing) . . . 10 to 95%
Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEC 60068-27
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEC 60068-6
Regulatory
Canada . . . . . . . . . . . . . . . . . . . . . . . . . CAN/CSA-C22.2 No. 61010-1
U.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UL 61010-1
Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 61326-1:2013
®PaxScan is a Registered Trademark of Varex Imaging Corporation
Dimensions are for reference only
Dimensions are in mm [inches]
Detector Characterization Charts in accordance with ASTM E2597-14 Standard Practice
for the Manufacturing Characterization of Digital Detector Arrays
NOTE: SMTR, CS and Lag quality numbers all improve with higher frame rate.
Full Resolution - 2pF Gain setting
Aluminum 6061
Titanium 6AI4V
Q1: How can I get a quotation?
A:Leave massage with your purchase requirements and we will reply you ASAP. And you may contact us directly by Trade Manager or Telephone.
Q2: Can you provide customized machine or SPM (Special purpose machine)?
A:Yes, we provide Smart CNC solutions for our customer in order to increase efficiency.
Q3: What's your warranty terms?
A:We will supply a replacement for parts that prove to be defective for a period of 12 months, starting on the machine's bill of lading date.
Q4: Why choose your company?
A:Products from the development, design, manufacture, assembly of the entire production process are carried out between plants with a complete production chain which is your most reliable guarantee. And most of the CNC brands can be chosen as the users' needs.
Q5: Does the standard accessories are included in the price?
A:Yes, all of our prices include listed standard accessories.
Q6: Can your company send the technical personnel to our company and direct our workers overseas?
A:We can supply this kind of service. When the machines arrive the buyer's installation site, we can timely send mechanical and electrical engineers to install according to the buyer's schedule. All these can be quoted and list in the contract. The seller will cooperate with the buyer to deal with visa and installation preparation before going abroad.
Q7: How can I choose the most suitable machines?
A:Please list your specifications or the products drawing, we will choose the most suitable machines for you.
Q8: What's your main products of your company?
A:We specialized in all kinds of machines, such as CNC Lathe, CNC Milling Machine, Vertical Machining Center, Conventional Lathe, Drilling Machine, Radial Drilling Machine, and so on.
Q9: What's the Payment Terms?
A:T/T 30% initial payment when order, 70% balance payment before shipment.
irrevocable letter of credit at sight
